| |
|
| |
|
| 0,9-5V Bis 5V DC-DC Step-Up Power Module |
|
| 2,54mm Pin Header Buchse |
|
| 2,00mm Pin Header Buchse |
|
| 7x9cm Single Side Prototyp PCB Steckbrett |
|
| 24AWG 8cm Zinn-Überzogene Breadboard PCB Solder Kabel |
|
| 28 Pin Sockel |
|
| 300mAh Lithiumionen-akku 3,7 V 402530 |
|
| 18650 batterie 3,7 V 9900mAh |
|
| L298N |
|
| NiMH Batterie Ladegerät 1,5 V S1 |
|
| SanDisk Micro SD Karte Class10 TF Karte 32GB |
|
| AA/1,5 V/PP3 Batterie Halter |
|
| Akku AA 2100mAh |
|
| Antistatischen Aluminium Lagerung Tasche Zip-Lock (6x9cm) |
|
| Batteriehalter 18650 |
|
| Buchse 12 |
|
| Buchse 16 |
|
| Buchse 2 |
|
| Buchse 20 |
|
| Buchse 8 |
|
| Buzzer |
|
| DC-DC 5V 3A Buck Step-down Power Supply Module MP1584EN |
|
| Digital Temperatur Temp Sensor Sonde DS18B20 |
|
| Diode 1N4004 |
|
| Diode 1N4005 |
|
| Diode 1N4006 |
|
| Diode 1N4007 |
|
| Display SSD1306 white |
|
| Distanzhalter 10mm HEX (w) M3 |
|
| Distanzhalter 15mm HEX (w) M3 |
|
| Distanzhalter 23mm HEX (w) M3 |
|
| Distanzhalter 30mm HEX (m) M3 (Thread 6mm, 30mm 30pcs) |
|
| Distanzhalter 30mm HEX (w) M3 |
|
| Distanzhalter 5mm HEX (m) M3 (Thread 6mm, 5mm 50pcs) |
|
| Drehknopf Blau (Volume) |
|
| Elektrolyt Kondensator 2200uF (6.3V2200UF 10PCS) |
|
| Elektrolyt Kondensator 220uF (16V220UF 50PCS) |
|
| Elektrolyt Kondensator 22uF (50V22UF 50PCS) |
|
| Elektrolyt Kondensator 4700uF (16V4700UF 5PCS) |
|
| Elektrolyt Kondensator 470uF (10V470UF 50PCS) |
|
| Elektrolyt Kondensator 47uF (25V47UF 50PCS) |
|
| ESP32 CAM |
|
| ESP8266 |
|
| GA12-N20 DC (1000 RPM) |
|
| Geräuscharm QR30B DC 5V 2,3 W |
|
| Glasrohr Sicherung 6.3A |
|
| HD 1080P VGA zu HDMI-kompatibel Konverter |
|
| Hexagon Mutter (25pcs M3) |
|
| Hexagonal Messing Welle |
|
| Holz Pappel (Internetradio) |
|
| Holz Pappel (Kamera) |
|
| Holz Pappel (Spielkonsole) |
|
| Jumper 2,54mm |
|
| Kabel mit Stecker 20cm |
|
| KF301-5,0-2P KF301-3P Pitch 5,0mm |
|
| Kondensator Keramik 22nF |
|
| Kreuz Truss Kopf Phillips Maschine Schrauben (M3 55pcs, 6mm) |
|
| Kreuz Truss Kopf Phillips Maschine Schrauben (M4 20pcs, 6mm) |
|
| Ladegeraet-Multi-Zelle 2S 1A 18650 |
|
| Ladegerät 18650 (micro USB) |
|
| Lautsprecher |
|
| Lautstärkeregler (PAM8403) |
|
| LOLIN D32 |
|
| MCP23017 |
|
| micro SD-Card |
|
| Mini Kippschalter SPST Rot Snap in Schalter 250V 3A |
|
| MTS-102 Rechten Winkel Kippschalter |
|
| OLED 1.3 modul weiss SPI 128x64 |
|
| OV2640 20cm |
|
| PCB 02 |
|
| PCB 03 |
|
| PCB 04 |
|
| Pro Micro ATmega32U4 5V 16MHz |
|
| Rad blau (Rubber coupling) |
|
| Relais 5V DC (5VDC SRD-05VDC-SL-C) |
|
| Schraube schwarz M3 10mm |
|
| Schraube schwarz M3 6mm |
|
| senkkopf Schraube (M3 50pcs 16mm) |
|
| senkkopf Schraube (M3 50pcs 30mm) |
|
| Stecker In Clip Clamp halter für 5x20mm Elektronische Sicherung |
|
| Stecker Mit Kabel (PH 2.0MM, 20cm, 4pin) |
|
| Stereo Jack Buchse |
|
| Stiftleisten 2.54mm 40pin |
|
| Tactile Push Button Switch Cap |
|
| Taster 1 (6x6x9) |
|
| Taster 2 |
|
| Taster 3 |
|
| Taster 4 (6x6x12) |
|
| TFT 1.44 black board |
|
| Transistor BC548 |
|
| ULN2003 28BYJ-48 5V |
|
| USB Buchse Typ A |
|
| USB Magnet Speisungskabel |
|
| Widerstand 120 Ohm |
|
| Widerstand 2 kOhm |
|
| Widerstand 2.4 kOhm |
|
| Widerstand 22 Ohm |
|
| Widerstand 4.7 kOhm |
|
| Widerstand 470 Ohm |
|
| Widerstand 6.2 kOhm |
|
| zuschneiden 025 |
|
| zuschneiden 050 |
|
| zuschneiden 100 |
|
| zuschneiden 125 |
|
Basteln
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.